Water-soluble & available
All nutrients are water-soluble. In the fully diluted mixture, they are available for feeding through roots and leaves.
Start simply · explore when you want
Clematis includes woody climbers and herbaceous forms. This page connects product application with plant knowledge about roots, stems, leaves, flowers and pruning groups.
For clematis in garden and container. Set pruning, planting depth and winter position by species and cultivar.
During active growth, normally April–September. Account for water needs and existing nutrients.
After planting or repotting, compost nutrients count. With dry roots, waterlogging or wilt, investigate the cause first.
Application in one place
Enter the actual amount of water needed. Plant height and width offer only a rough guide for one leafy clematis; support size or stem length alone does not set water needs.
1 capful = 5 ml. Use a suitable measuring aid for smaller partial amounts.
Enter a water amount from 0.1 to 1,000 litres.
Rough guide for root feeding one leafy clematis, not foliar application. Height and width do not replace checking the root ball; use actual water volume for trellised plants.
General GREEN24 guide: height (m) × width (m) × 3–4 litres. Centimetres are converted to metres. The concentrate amount follows this fertiliser’s standard dilution. The estimate does not measure individual water requirements.
Use a clean watering can or sprayer; preferably low-lime water or rainwater at 15–25 °C.
Enter the water volume. When using the size-based guide, also check root space and actual root-ball moisture.
Start by filling the container with part of the chosen water volume.
Shake the bottle. 1 capful = 5 ml; use a measuring aid for smaller partial amounts.
Add the calculated amount of concentrate to the water.
Top up to the chosen water volume and mix well. Watering or spraying: see below.
When to feed? Every 3–4 weeks during active growth; normally April–September. Account for nutrients already present, especially in fresh compost. Do not continue the summer schedule during dormancy.
Pre-moisten the root zone and distribute the mixture through rooted soil. Let excess water drain from containers; first correct dry root balls or waterlogging.
Finely wet existing leaves in overcast conditions or morning or evening; avoid open flowers. Foliar feeding counts towards the same feeding plan and is not automatically added to root feeding.
Intended for root and foliar feeding. Label net mass per 250 ml bottle: 278 g. The twin pack contains two of these bottles.
| Pack size | Price |
|---|---|
| 250 ml | €9,85 EUR |
| 500 ml – twin pack (2 × 250 ml) | €18,95 EUR |
Nutrient percentages. Product pH: 6.9. This does not guarantee the pH of the diluted solution or soil.
Pre-fertilised compost and nutrients already in the root ball count towards total feeding. Use other products according to their own directions; do not tank-mix without product-specific confirmation.
Use other plant care products according to their own instructions. This profile does not document product-specific approval to tank-mix this clematis fertiliser with another product.
Ask about specific mixability →Beyond NPK · understand the formulation
The liquid NPK concentrate supplements nutrition during clematis growth. The diluted feed is intended for roots and existing foliage.
All nutrients are water-soluble. In the fully diluted mixture, they are available for feeding through roots and leaves.
Copper, iron, manganese and zinc are declared as EDTA chelates. This binding helps keep these trace nutrients available in solution.
The buffer system helps regulate the pH of the finished watering or spraying solution. The source water also influences the resulting value.
Good wetting and adherence help distribute the spray solution across the leaves. Dissolved nutrients are then available at the leaf surface for uptake.
The formulation helps reduce adverse hard-water effects and deposits on the leaves. Low-lime water or rainwater provides a good starting point.
Application according to the label supports clematis in garden and container. Suitable root conditions, light and moisture remain separate requirements.
Nutrients contribute to leaf development and metabolism. Flowering season and abundance also depend on species, cultivar, site and pruning; the fertiliser does not promise a particular flower number or size.
Chelation can reduce effects of hard water in solution; it does not remove calcium or magnesium. The product pH of 6.9 describes the concentrate, not the soil or a guaranteed pH of the diluted feed.
Use clean, suitable watering or spraying equipment. Measure the water and calculated concentrate quantity carefully.
Clematis through the year
Clematis includes early and late flowering climbers as well as herbaceous forms. Seasons and flowers differ by species and cultivar; the scenes show examples.

Nutrition is one part of clematis care. Root conditions, light, water and the correct pruning group affect growth and flowering. Fertiliser does not replace a suitable position or pruning.
Leaves use light to make sugars. Many garden forms are deciduous, some species evergreen; foliage and seasons differ.
Early species bloom in spring on old wood; later types may flower on new growth. Images show group examples and do not imply continuous flowering of one cultivar.
Many clematis develop decorative silky seed heads. Flowering and seed production depend on species, cultivar and weather; they are not a food crop.

Climbing clematis grip slender supports with leaf stalks. Compact and herbaceous types need different space planning from vigorous climbers. Check cultivar and pruning group before purchase.
From root to flower
Fine roots absorb water and dissolved nutrients. Leaves use light to make sugars for growth. Stems connect the plant and carry leaves and flowers. Nitrogen supports foliage, phosphorus energy transfer and potassium water balance. Flowering and dormancy differ by species, cultivar and pruning group.
Fine roots need moist, aerated soil. Container root space is limited; drainage holes and suitable compost without waterlogging matter.
Climbing and herbaceous clematis grow differently. Living previous-year stems matter for the first bloom in pruning group 2; group 3 flowers on new growth. Identify the cultivar before pruning.
Many garden forms are deciduous, while some species are evergreen. Nutrients support leaf functions but do not replace light. Autumn leaf fall is normal for deciduous types.
Small dry fruits often carry elongated feathery styles, forming the fluffy overall look. Seeds of garden hybrids do not necessarily retain cultivar traits.
Understanding plant feeding
Root feeding brings diluted solution into clematis root space. Fine roots take up dissolved nutrients; foliar feeding puts solution on existing leaves. Both routes belong to one feeding plan.
Select a point in the picture or choose a stage.
Stage 01 / 04
In pre-moistened soil, the diluted mixture meets fine root areas. Dissolved nutrients are available for uptake at the contact surface.
Good to knowAlways dilute the concentrate and keep to the stated dosage.
Watering carries dissolved nutrients into the growing medium around the roots. Contact with the absorbing root surfaces is the first step.
Stage 02 / 04
Fine root hairs increase contact with the soil. Transport proteins in cell membranes help take up dissolved nutrients.
Good to knowRoots take up nutrients; they do not simply absorb all the fertiliser along with the water.
Root hairs increase the contact area. Transport proteins in cell membranes enable mineral ions to enter; water movement and nutrient uptake are distinct processes.
Stage 03 / 04
Dissolved nutrients pass through regulated steps in living root cells. The clematis is not simply flushed with the entire contents of the feed solution.
Good to knowMore fertiliser does not automatically mean better nutrition.
Controlled steps within root tissue lie between the root surface and onward transport. Transport across cell membranes enables nutrient uptake; water movement and nutrient uptake are different processes.
Stage 04 / 04
Water and absorbed nutrients can move through the xylem to above-ground parts. Healthy roots and active leaves are part of this process.
Good to knowHealthy roots and suitable growing conditions are important for nutrient supply.
After entering the vascular tissue, nutrients can travel with the water stream in the xylem towards the shoot. Uptake and nutrient supply also depend on root health and growing conditions.
Stage 01 / 04
The diluted mixture contacts the leaf surface. Apply in the morning, evening or under overcast skies, avoid open flowers and observe the temperature limits.
Good to knowThis concentrate is also suitable for foliar application. Use only diluted and include it in the combined feeding plan.
Foliar feeding places diluted nutrient solution on the leaf surface. Wetting depends on factors including the leaf surface and the solution.
Stage 02 / 04
Dissolved nutrients can cross the protective surface layer; routes involving small leaf openings may also contribute. Conditions and leaf characteristics affect uptake.
Good to knowDifferent leaves do not absorb a nutrient solution equally well.
Dissolved nutrients can pass through the protective cuticle; pathways involving stomata may also contribute. Their relative importance varies with plant species and conditions.
Stage 03 / 04
After crossing the surface, living leaf cells can take up nutrients and use them in metabolism. A visible droplet alone does not demonstrate this step.
Good to knowA droplet on a leaf does not yet mean its nutrients have been absorbed.
After crossing the surface, nutrients can be taken up by living leaf cells. The amount depends on factors including the nutrient, formulation and environmental conditions.
Stage 04 / 04
Absorbed nutrients can be used in the leaf or redistributed, depending on the nutrient. This does not mean immediate uniform supply to every shoot or flower.
Good to knowFoliar feeding does not mean every nutrient immediately reaches the whole plant.
Absorbed nutrients can be used within the leaf. Whether and how far they move to other plant parts depends on the nutrient and the plant's condition.
Development influences requirements
First secure root-ball moisture, stability and protected stems. Fresh pre-fertilised compost counts towards nutrition. The label does not establish a separate stronger or weaker dilution for young plants.
Observe stems, foliage and flowers during growth. Spring and summer bloomers and old and new flowering wood differ; coordinate label feeding with moisture and nutrients already present.
Many garden forms shed leaves in autumn and rest in winter. Evergreens behave differently and may need protection. Do not extend summer feeding mechanically into dormancy.
Consider species, cultivar, season, roots and existing nutrients together. Height alone sets neither dilution nor water amount.
Application & calculator →Your growing conditions matter
Climbing, compact and herbaceous forms need different space. Choose position, moisture, planting depth and support for the species and cultivar.
Choose a stable container with drainage, enough root space and suitable support. Check root-ball moisture and let excess drain. Account for compost nutrients when applying liquid feed.
Provide aerated, drained root space and a stable support with slender elements. Sun to partial shade with a cool root zone suits most garden forms. Choose planting depth by plant group.
Container roots face more frost than roots in the ground. Tender evergreen species need suitable shelter; deciduous types shed their leaves.
Climbers grip slender supports with leaf stalks. Guide non-climbing herbaceous types loosely or support them among neighbouring plants. Plan pruning by cultivar and group.
Clematis & Climber Compost provides fresh root space; account for its initial fertiliser. The Clematis Repotting Set combines compost and one 250 ml bottle of this fertiliser.
Clematis & Climber Compost: account for initial nutrients; its label gives no fixed waiting period before further feeding.
Clematis Repotting Set: use compost and fertiliser according to their separate instructions.
Understand plant care problems
Wilting stems, yellow leaves or few flowers have different causes. Check root-ball moisture, drainage, stem injury, position and pruning group before changing feeding.
Fungal clematis wilt especially affects large-flowered hybrids. A dry root ball or damaged stems can look similar. Inspect roots and stem bases, remove affected dead stems and seek advice when the cause is unclear.
A powdery coating can indicate powdery mildew. Inspect both leaf surfaces, improve airflow and reduce drought stress; choose treatment only after suitable diagnosis.
Aphids can colonise soft tips, while slugs and snails especially damage young shoots. Inspect regularly, identify the pest and damage, and choose targeted measures instead of a routine spraying programme.
Dry roots, waterlogging or a broken stem can cause similar visible symptoms. Check root-ball moisture, clear drainage holes and stem injuries before adding fertiliser.
These details help assess growth and possible damage:
One symptom does not prove a nutrient deficiency. Sudden wilt may also involve dry roots, stem injury or disease; large-flowered hybrids can be affected by fungal clematis wilt.
Check root-ball moisture, roots, damaged stems and leaf undersides. For advice, provide photographs of the whole plant and affected parts, together with the cultivar name.
For sucking insects
Before use, check the current label for plant, pest, site and user category.
For spider mites
Use only for a matching diagnosis and as allowed by the current label for plant, pest, site and user category.
Use plant protection products safely. Always read the label and product information before use.
For clematis in garden and container. Set pruning, planting depth and winter position by species and cultivar.
Dilution: 5 ml per litre of water.
Measure out the concentrate and mix it with the stated amount of water. Never apply undiluted.
Calculated at the stated standard dilution; the amount needed per application depends on the plant and growing conditions.
Do not apply in sunlight, below 5 °C or above 30 °C. Never apply the concentrate undiluted.
SDS – Safety data sheet available on request.
Avoid contact with eyes, skin and clothing. Do not inhale spray mist. Wear protective clothing, rubber gloves and safety glasses when handling the product. Keep away from food and beverages. Wash your face and hands thoroughly after use. Official advisory recommendations take precedence. Fertilisers may leave permanent stains on surfaces. Do not allow fertiliser to enter bodies of water or wastewater.
Official advisory recommendations take precedence.
Wash your face and hands thoroughly. Use diluted fertiliser promptly and keep it out of water bodies and wastewater.
Store in a dry, dark place above +8 °C and no higher than +38 °C. Keep out of reach of children and animals.
Keep tightly closed in the original container, separate from food and animal feed.
Avoid large temperature fluctuations. Temperature-related discolouration or crystals may occur; the crystals dissolve by the dilution stage at the latest and do not impair product quality. For this fertiliser, store dry and dark above 8 °C and at no more than 38 °C. Use diluted fertiliser promptly.
Do not allow fertiliser residues or rinsing water to enter waterways or wastewater. Follow the disposal instructions on the packaging.
Measure concentrate accurately and apply only after dilution. More fertiliser does not compensate for insufficient light, drought or damaged roots.
The original leaflet explains safe preparation and application. Use this concentrate’s own dilution in the calculator and account for root and foliar applications together.