Water-soluble & available
All nutrients are water-soluble. In the fully diluted mixture, they are available for feeding through roots and leaves.
Roses are diverse flowering shrubs. Woody, prickly shoots, compound leaves and flower buds shape their growth. Here you can explore application and care in beds or pots.
Application in one place
5 ml per 2.5 litres of water
1 capful = 5 ml. Use a suitable measuring aid for smaller partial amounts.
Enter a water amount from 0.1 to 1,000 litres.
Only a rough guide to root watering one rose bush. Measure height from the soil and full leafy width. For climbing roses and continuous beds, use the water volume actually needed. Check moisture, roots, substrate and weather.
General GREEN24 guide: height (m) × width (m) × 3–4 litres. Centimetres are converted to metres. The concentrate amount follows this fertiliser’s dilution. The guide does not measure individual water requirements.
Use a clean watering can or sprayer; preferably low-lime water or rainwater at 15–25 °C.
Enter the water volume or use the size guide for one shrub. Check root-ball moisture and drainage before watering.
Start by filling the container with part of the chosen water volume.
Shake the bottle. 1 capful = 5 ml; use a measuring aid for smaller partial amounts.
Add the calculated amount of concentrate to the water.
Top up to the chosen water volume and mix well. Watering or spraying: see below.
When to feed? 5 ml equals one capful. Every 1–2 weeks from April to September during active growth.
Moisten the root ball first, then distribute the mixture evenly through the root zone. Ensure free drainage in pots and check soil moisture in borders. Do not feed dry or waterlogged roots.
Mist rose leaves finely in the morning, evening or under cloud cover; avoid open flowers. Foliar feeding belongs in the same plan as root feeding.
For root and foliar feeding of roses. Original declared net masses: 311 g per 250 ml, 1233 g per litre. The twin pack contains two 250 ml bottles (622 g net mass, calculated).
| Pack size | Price | Net mass | Yield at label dilution |
|---|---|---|---|
| 250 ml | 9.95 € Unit price ( 39.80 €/ l) | 311 g | 125.0 l |
| 500 ml – twin pack (2 × 250 ml) | 18.95 € Unit price ( 37.90 €/ l) | 622 gcalculated: 2 × 311 g | 250.0 l |
| 1 litre | 29.95 € Unit price ( 29.95 €/ l) | 1233 g | 500.0 l |
Yield at the labelled standard dilution; account for pack size and existing nutrients.
Net mass excludes the packaging. The twin-pack total is calculated from two individual bottles.
For roses in beds or pots. Match growth form, position and pruning to rose group and cultivar.
During active growth when additional nutrients are needed. Account for soil reserves, fresh compost and previous feeds.
Account for fertiliser in fresh compost after repotting. Begin extra feeding according to need and existing nutrients.
Beyond NPK · understand the formulation
Water-soluble nutrients and coordinated formulation properties make feeding your rose straightforward. Explore what the diluted mixture provides for leaves and roots.
All nutrients are water-soluble. In the fully diluted mixture, they are available for feeding through roots and leaves.
Copper, iron, manganese and zinc are declared as EDTA chelates. This binding helps keep these trace nutrients available in solution.
The buffer system helps regulate the pH of the finished watering or spraying solution. The source water also influences the resulting value.
Good wetting and adherence help distribute the spray solution across the leaves. Dissolved nutrients are then available at the leaf surface for uptake.
Prefer low-lime water or rainwater at 15–25°C for mixing. The formulation can reduce hardness effects; no particular soil pH is promised.
High plant compatibility when used correctly supports the development of leaves and flowering shoots. Balanced nutrition supports your rose’s natural foliage quality.
Nitrogen contributes to chlorophyll and protein formation, phosphorus to energy transfer and potassium to water regulation. Flowering also depends on cultivar, light, water and pruning.
Chelation can reduce interfering effects of water hardness; it does not remove calcium and magnesium. The concentrate pH of 6.2 does not specify garden soil pH.
Use clean, suitable watering or spraying equipment. Measure the water and calculated concentrate quantity carefully.
Use other care products according to their own instructions. A product recommendation does not confirm tank mixing.
Do not mix undiluted concentrates. Follow each product’s own application method and dose.
NPK fertiliser solution 6.5+8.0+9.0. Declared mass percentages; pH 6.2.
GREEN24 · Plant knowledge
Roses produce new shoots, compound leaves, buds and blooms. The garden scene is an AI-generated example; growth and flowering vary by cultivar and site.

Compound rose leaves with serrated leaflets use light to form sugars. Leaf colour and health also depend on water, position and pests or diseases.

Buds and blooms develop differently with cultivar and weather. Nutrients support growth but cannot replace light, water or suitable pruning.

New shoots extend the bush and carry leaves and flowers. Remove dead or diseased wood selectively; pruning depends on rose group and flowering habit.
GREEN24
8.90 €
( 0.89 €/ l)
Rose Compost After 4–6 weeks assess supplementary feeding according to the label and plant requirements; account for initial nutrients.
10 litres
Delivery time: In stock · 1–3 days (DE)
Incl. VAT, plus shipping costs
GREEN24
From 6.95 €
( 27.80 €/ l)
For hard irrigation water, pretreat according to its instructions, settle for 5–6 hours and decant carefully. This is not approval for tank mixing.
250 ml · 1 litre · 5 litres
Delivery time: In stock · 1–3 days (DE)
Incl. VAT, plus shipping costs
BERGER
9.95 €
For adding growing medium and small planting jobs. Avoid damaging roots.
Delivery time: In stock · 1–3 days (DE)
Incl. VAT, plus shipping costs
GREEN24
10.90 €
For collecting clippings and plant debris during care and repotting.
Delivery time: In stock · 1–3 days (DE)
Incl. VAT, plus shipping costs
Leaves use light; roots take up water and mineral nutrients. The diagrams show how plant organs work together and how nutrients are absorbed.
Active roots need water and oxygen. Humus-rich, free-draining compost and open drainage holes support the root zone in pots. More fertiliser cannot compensate for waterlogging or a dried-out root ball.
Conducting tissue connects roots and above-ground parts. Potassium contributes to water regulation and transport. Plan pruning for the rose group and flowering habit rather than cutting every shoot alike.
Nitrogen contributes to chlorophyll and proteins; iron and manganese have roles in metabolism. Yellow leaves can still have several causes. Assess leaf age, moisture, soil reaction and roots together.
Phosphorus is involved in energy transfer, but it alone cannot guarantee a flower count. Bud development also depends on cultivar, light, water and pruning.
Select a point in the picture or choose a stage.
Stage 01 / 04
Apply the diluted mixture to the previously moistened root zone. Wet the root ball evenly without leaving water standing in an outer pot.
Good to knowAssess wilting through root-ball moisture and root health before increasing fertiliser.
The first step is contact between dissolved nutrients and root regions capable of uptake. The diagram shows this function, not a species-specific tissue section. Assess wilting through root-ball moisture and root health before increasing fertiliser.
Stage 02 / 04
Fine roots and root hairs contact the soil or growing medium. Dissolved nutrients enter root cells through regulated processes.
Good to knowFresh compost and existing soil reserves already contribute to your rose's nutrition.
Root hairs increase the contact area. Transport across cell membranes is distinct from water movement alone. Fresh compost and existing soil reserves already contribute to your rose's nutrition.
Stage 03 / 04
Cell membranes and transport proteins regulate the entry of dissolved nutrients. These processes are distinct from water moving through the plant.
Good to knowA stronger concentration cannot replace healthy roots or adequate rooting space.
Controlled processes within living root cells lie between the surface and the conducting tissue. Functional blocks do not depict the entire root anatomy. A stronger concentration cannot replace healthy roots or adequate rooting space.
Stage 04 / 04
After uptake, water and nutrients can travel through the xylem into shoots and leaves. Growth and flower development still depend on species, cultivar and growing conditions.
Good to knowWater and nutrient transport support new rose shoots; pruning and flowering habit depend on the rose group.
Xylem transports water and dissolved substances. Root health and growing conditions affect uptake and movement. How new shoots flower differs among rose groups.
Stage 01 / 04
Apply the diluted mixture finely to the leaves. Avoid open flowers; they are not the target of foliar feeding.
Good to knowCount foliar applications within the shared feeding plan, not automatically on top of a full root application.
The leaf surface must contact the diluted solution. Wetting is the first step, not evidence that nutrients have already been absorbed. Count foliar applications within the shared feeding plan, not automatically on top of a full root application.
Stage 02 / 04
The leaf blade has a protective surface. Dissolved nutrients can cross it; leaf age and application conditions affect uptake.
Good to knowA larger bloom is no reason to increase spray strength.
Nutrients can cross the protective cuticle, and stomatal routes may contribute. Their role depends on conditions. A larger bloom is no reason to increase concentration.
Stage 03 / 04
Nutrients that have entered the leaf can be absorbed by its cells and used in metabolism. A visible droplet alone is not evidence of uptake.
Good to knowYellowing leaves have several possible causes. Also check soil reaction, watering and roots.
After crossing the surface, nutrients can be taken up by living leaf cells. Quantity also depends on the nutrient and surrounding conditions. Yellowing leaves have several possible causes. Also check soil reaction, watering and roots.
Stage 04 / 04
Movement from the leaf depends on nutrient and plant condition. Foliar feeding alone cannot guarantee a flower count.
Good to knowFoliar feeding does not replace healthy roots or checks of light and water.
Whether and how far nutrients move from a leaf to other parts varies among nutrients. Immediate supply to the whole plant cannot be inferred. A foliar feed alone cannot promise more blooms.
Development influences requirements
After planting, first ensure even root-ball moisture and free drainage. Fresh compost may already contain fertiliser. Base the start of feeding on root condition and existing nutrition, not plant height alone.
Feed at the labelled interval during active growth when extra nutrients are needed. Do not try to correct poor flowering with stronger dilution: light, pruning, frost or drought may be involved.
Pause feeding during dormancy. Many garden roses drop their leaves in autumn; new growth can be damaged by late frost.
Consider species, growth stage, root condition and existing nutrients together. Height or flower count alone does not justify changing the dilution.
Application & calculator →Adapt care to the growing conditions and stage of growth. If you notice changes, check light, water and roots first — then take targeted action.
Use a sufficiently large pot with free drainage. Check root-ball moisture regularly during warm weather and flowering. Keep compost evenly moist without waterlogging; do not leave water standing in an outer pot.
Free-draining garden soil and consistent, appropriate watering form the basis. Established roses do not automatically need extra fertiliser. A soil test can help when supply is unclear.
Assess hardiness by cultivar and location. Protect pot roots from severe freezing while retaining drainage. Do not feed in dormancy.
When repotting, inspect the root ball and choose a suitable container with drainage. Account for nutrients in fresh compost. Choose pruning time and severity for the rose group and flowering habit.
Inspect young shoots, observe natural predators and identify the cause.
Inspect foliage regularly; distinguish symptoms and consider position, cultivar and air movement.
Rain often fails to reach roots beside walls. Check soil moisture before interpreting leaf loss only as nutrient deficiency.
These details help assess growing conditions, root problems or a possible infestation:
Leaf colour alone does not prove iron deficiency. Root condition and soil reaction also affect nutrient supply. Identify coatings, webbing or recurring spots before choosing a suitable treatment.
Photographs of the whole plant and both leaf surfaces, with details of location, compost and watering, help identify problems.
For certain insect pests
For certain sucking, biting or leaf-mining insects and whiteflies on ornamentals. Check crop, pest and application site against the label.
Use plant protection products safely. Always read the label and product information before use.

Explore position, root space and care for the actual plant species.
View the plant guide
Consider light, water, root space and nutrients together. More fertiliser cannot solve every care problem.
Read the guide5 ml concentrate per 2.5 litres of water: one 5 ml capful. This equals 2 ml per litre of water.
At standard dilution, 250 ml treats 125 litres of water, the twin pack 250 litres and 1 litre of concentrate 500 litres.
Every 1–2 weeks from April to September during active growth. Account for plant needs and existing nutrients.
Standard 2 ml/L (100%), young plants 1 ml/L (50%), seedlings with leaves 0.4 ml/L (20%). The calculator accounts for the selected stage.
The original 250 ml and 1 litre labels declare the same NPK composition and dilution. A twin pack contains two 250 ml bottles.
Yes, with the same diluted solution. Avoid open flowers and observe light and temperature precautions.
SDS – Safety data sheet available on request.
For horticultural use. Suitable for root and foliar feeding.
For horticultural use. Suitable for root and foliar feeding. Do not use undiluted. Shake well before use. Keep out of reach of children and animals. Prefer low-lime water or rainwater at 15–25 °C. Do not fertilise in direct sunlight, below 5 °C or above 30 °C. Apply to the pre-moistened root zone or spray foliage. Do not spray open flowers. Wear rubber gloves and safety goggles when mixing and applying; use clean, chemically suitable tools and containers. Official advisory recommendations take precedence.
Official advisory recommendations take precedence.
Wash your face and hands thoroughly. Use diluted fertiliser promptly and keep it out of water bodies and wastewater.
The original leaflet explains safe mixing and use. Follow this Rose Fertiliser Bloom Dream’s product-specific dilution in the calculator. Assess roots and existing nutrition before feeding young, newly planted or damaged plants.
Dry and dark Store above 8 °C and at no more than 38 °C. Keep out of reach of children and animals.
Keep tightly closed in the original container, separate from food and animal feed.
Dry and dark Store above 8 °C and at no more than 38 °C. Keep out of reach of children and animals.
Do not allow fertiliser residues or rinsing water to enter waterways or wastewater. Follow the disposal instructions on the packaging.
Measure concentrate accurately and apply only after dilution. More fertiliser does not compensate for insufficient light, drought or damaged roots.
Plant species, pests, diseases and care in seconds – plus products that really fit, free of charge.