Yucca Repotting Set

Repotting in eight steps

1. Check whether repotting is needed

   Check root development and compost structure before repotting. Work near the start of active growth where possible.

2. Choose a suitable container

   Choose a stable pot with a little space beside the root ball. An oversized container can remain wet around a small root system.

3. Provide free drainage

   Keep drainage holes open. Ensure you can empty the outer pot or saucer later.

4. Release the root ball gently

   Support the root ball and release it gently from the old pot. Retain healthy roots and avoid pulling leaves or stems.

5. Keep the original planting depth

   Set the yucca at its previous depth. Do not bury the stem further and position the pot securely.

6. Fill around the root ball

   Add fresh compost beneath and beside the root ball. Close large air pockets gently and leave a watering rim without compacting the medium hard.

7. Water and allow drainage

   Check moisture in the old root ball and fresh compost after planting. Moisten as needed and allow excess water to drain.

8. Follow establishment

   According to the label, start supplementary feeding no earlier than 4 weeks after planting. First check growth, roots and moisture; a dormant plant needs no calendar-based feed.

Prepare the fertiliser separately

10 ml per 2.5 l water.

Every 2–3 weeks during active growth.

Regular application period: Active growth; no fixed months stated on the label.

1. Shake

   Shake the concentrate before use.

2. Prepare water

   Pour the required amount of water into a suitable container.

3. Select strength

   Use standard 100%, young plants 50%, or seedlings with leaves 20% of the basic dilution. Concentration does not determine the watering volume needed.

4. Measure concentrate

   Measure the calculated amount accurately with a suitable measuring aid.

5. Mix

   Add the concentrate to the water and mix evenly.

6. Apply as needed

   Feed the already moist root ball when nutrients are needed; do not overwater using a rigid water volume.

Do not mix the entire bottle into the bag. The compost is ready to use; dilute the concentrate separately with water.

250 ml liquid fertiliser

NPK 4.6 + 2.8 + 4.2

Declared nutrient percentages. Product pH: 6.8. This does not describe the pH of the diluted solution or the soil.

• 4.6% total nitrogen (N)
• 2.8% water-soluble phosphate (P₂O₅)
• 4.2% water-soluble potassium oxide (K₂O)
• 4.4% urea nitrogen
• 0.005% boron (B)
• 0.002% copper (Cu) · EDTA chelate
• 0.01% iron (Fe) · EDTA chelate
• 0.006% manganese (Mn) · EDTA chelate
• 0.0005% molybdenum (Mo)
• 0.002% zinc (Zn) · EDTA chelate

10 litres of compost: ingredients

Contains peat.

Raised-bog peat H3–H8, plant materials including coir, wood fibre and bark humus, expanded clay, perlite, lava, calcium carbonate and NPK fertiliser; with wetting agents.

Declared growing-medium values

Own 10-litre bag declaration

Values refer to the time the product is placed on the market. Nutrient levels can change in storage; check before later use.

• pH (CaCl₂): 6.0.
• Salt content (KCl): 1.5 g/l.
• Nitrogen (N): 200 mg/l (CaCl₂).
• Phosphate (P₂O₅): 240 mg/l (CAL).
• Potassium oxide (K₂O): 420 mg/l (CAL).
• Magnesium (Mg): 60 mg/l (CaCl₂).
• Also contains boron, copper and zinc in horticulturally relevant amounts, without individual figures.

Plant profile and care calendar

Buy the components separately

• Yucca Fertiliser
• Yucca Compost

Fertiliser

• Do not use undiluted. Shake well before use.
• Keep out of reach of children and animals.
• Preferably use low-lime water or rainwater at 15–25 °C.
• Do not apply in direct sunlight or at temperatures below 5 °C or above 30 °C.
• Apply to a pre-moistened root zone or spray the foliage. Do not spray open flowers.

Dry · dark · above 8 °C to a maximum of 38 °C

Store in a dry, dark place above 8 °C and at no more than 38 °C.

Compost

Minimise dust and do not inhale it. Avoid eye contact and prolonged skin contact.

Keep away from food and animal feed, out of reach of children and animals. Wash hands after use.

Store protected from weather, in dry and dark conditions; protect against drying out, excessive moisture and direct sun. Reseal opened packaging tightly and use promptly.