FELCO 6 bypass secateurs for medium hands

The compact FELCO 6 is designed for medium-sized right hands. Its short blade and angled cutting head support controlled cuts on vines, roses and woody plants. It suits vine pruning, garden maintenance and suitable work in orchards and nurseries. Check that the handle opening fits your hand securely.

Rated cutting capacity is up to 20 mm. Wood species, condition and hand strength affect comfortable cutting. Use suitable loppers or a saw for thicker branches.

1. Check the fit

   FELCO 6 is designed for medium right hands. Check that you can open and close the handles comfortably without changing your grip.

2. Position the cut

   Keep the blade towards the part of the plant you are retaining. Place the shoot deep within the open cutting head.

3. Close smoothly

   Apply steady pressure without levering sideways. Keep your free hand away from the cutting area.

4. After pruning

   Remove sap and dirt, dry the tool and apply a little oil to moving parts.

The hardened steel blade and counter blade work by bypass cutting. The counter blade is screw-mounted and replaceable. Micrometric adjustment lets you fine-tune the clearance between the cutting parts.

Forged aluminium handles combine strength with moderate weight. The angled cutting head supports hand positioning, while non-slip grip covers help you guide the tool. The bumper and shock absorber cushion the end of the closing movement.

The sap groove helps channel sap and residues away from the cutting area. A separate wire-cutting notch is intended for thin wire. Do not use the main cutting edge for this and follow the manufacturer instructions.

Design

One-handed bypass secateurs

Blade length

42 mm

Supplied

1 × FELCO 6

Counter blade

Screw-mounted and replaceable

Before replacing parts, check the FELCO 6 marking on the tool. Use its model-specific manufacturer information to identify blades, springs and other components. Similar-looking parts are not necessarily interchangeable.

Follow the manufacturer instructions for the exact model and component when dismantling, fitting and adjusting.

• Keep your free hand and other people clear of the cutting area.
• Place the tool securely before maintenance; do not test sharp edges with bare fingers.
• Close the catch for transport and storage, and keep the tool out of children’s reach.

Remove residues after pruning and dry the tool. Lightly oil moving parts and wipe off excess oil. Sharpen the blade as needed, following the manufacturer’s instructions.

If cleaning and adjustment do not restore a clean cut, inspect the blade and counter blade for wear. Check the model before ordering replacement parts.