At a glance
- Choose the version
- 2 model-specific versions
- Contents
- 1 black ejector plate with 3 × 3 pins in the selected version. Cell tray and plants not included.
Use in six steps
The ejector plate releases up to nine matching propagation plugs from below in a 3×3 arrangement. Choose the version matching the model and hole spacing of the G24 tray.
- Check the tray model
Match your cell tray model to the selected ejector version. Similar cell counts or outer dimensions alone do not establish compatibility.
- Check the plugs
Remove sufficiently rooted plugs and check their condition first. Handle fragile or loose plugs carefully.
- Prepare the workspace
Support the tray securely on a stable work surface. Make the base openings of the chosen cells accessible.
- Align the ejector
Align the nine pins beneath the matching 3 × 3 base openings. Keep them straight and use only the matching hole spacing.
- Lift the plugs
Apply gentle, even pressure from below. Alternatively, lower the tray carefully over the upright ejector. Do not pull the shoots.
- Transplant and clean
Remove the released plugs carefully and grow them on. Remove growing-medium residues from the tool and check for damage before further use.
Versions and dimensions
- Contents
- 1 black ejector plate with 3 × 3 pins in the selected version. Cell tray and plants not included.
- Material
- PLA
- Colour
- Black
- HP D 240/3,7
- Pin length: 30 mm; Ø 11 mm; Overall dimensions: 80 × 75 × 32 mm
- QP D 576
- Pin length: 30 mm; Ø 7.5 mm; Overall dimensions: 60 × 60 × 32 mm
Matching G24 trays
Choose the ejector by the exact tray model. Each listed set of dimensions belongs only to its named version.
Handling guidance
- Align tool and tray straight and do not force them.
- Stop using tools with damaged pins or bases.
Cleaning and storage
Remove growing-medium residues after use, clean with water when needed and store protected.
Manufacturer and product information
Manufacturer
The image shows the construction; use the dimensions assigned to the selected version.
Frequently asked questions
Does one version fit every G24 tray?
No. Pin diameter, length and, for multi-pin ejectors, spacing depend on the model. Match the exact tray designation before selecting.
Are cell trays included?
1 black ejector plate with 3 × 3 pins in the selected version. Cell tray and plants not included.
How do I remove the plug?
Lift gently from below through the matching base opening, then remove the released plug without pulling the shoots.
Release plugs from below
The ejector plate releases up to nine matching propagation plugs from below in a 3×3 arrangement. Choose the version matching the model and hole spacing of the G24 tray.
Choose by tray model
The correct version depends on the exact tray model and its matched pin dimensions.
Handle plugs gently for growing on
Align the tool straight, lift the plug gently and remove it without pulling the shoot.
Pairs well with
Selected additions for your plant care.
-
G24 Propagation Tray QP D 240/3,7 – 240 Cells
€7,95 View productMatching tray for ejector version HP D 240/3,7.
-
G24 Propagation Tray QP D 576 – 576 Cells
€7,95 View productMatching tray for ejector version QP D 576.
